iQuip Timbabuild® EWS is the primer which is used with both EHB60 and ERC10 as a brush applied epoxy solution which has two actions - to prepare the bare wood fibres for the repair resin causing them to protrude and aid adhesion, and to prevent any future water attack in the wood.
 
 
Main Benefits
Solvent Free - suitable for indoors and outdoors
Excellent Penetration due to the Low Viscosity
Pre-measured squeeze chamber 2:1 ratio to ensure accurate mix
High Strength & Durability
Fast and Simple to Use, Easy to Clean and Store
Used with both the ERC10 & EHB60 systems
Repair can be applied after 20 minutes and up to 4 hours afterwards
 
 
Timbabuild® E.W.S. (Epoxy Wood Stabilizer) is supplied pre-measured in two small plastic bottles at a ratio of 2:1. One bottle contains the base component the other contains the activator. Small amounts may be prepared using the built-in measuring chambers. Having first removed all of the decayed timber and establishing that the moisture content of the timber is less than 18%., the products should be mixed thoroughly and applied to the repair area liberally using a disposable brush.